I recently bought myself a projector, which I installed in one corner of the room. Unfortunately I didn’t buy a long enough HDMI cable with it, so I could not connect it to my desktop computer and instead used my loyal ThinkPad T60 for playback. But I also wanted to be able to play some games using the projector, for which my laptop wasn’t beefy enough. So I thought, why not just stream the games from my desktop computer to the laptop?
In this post I will explore how to stream 720p (or any quality for that matter) from one computer to another using ffmpeg and netcat, with a latency below 100ms, which is good enough for many games. TL;DR; If you don’t care about the technical details, just jump to the end of the post to try it out yourself.
If you happen to own an Epson EH-TW5200 projector, you might have experienced problems setting Full-HD (1920×1080) resolution using a VGA connection under linux. When I set the resolution to Full-HD, the whole screen would stay completely black. This is just a quick fix for the other 4 people that might have this problem.
# Create a new full-hd modeline setting using cvt
# copy the cvt output after the Modeline and add it to xrandr
# make the mode available to the VGA output, in my case VGA-0
# now set the mode for the VGA output
The difference between the original modeline and the new one is the vertical refresh rate: The projector proposed 60.02 Hz via EDID, and the new modeline is just a tad slower, using 59.94 Hz. I was connecting a ThinkPad T60 to the projector, so the problem might also be the RAMDAC of the laptop, something about blank phases, who knows.
That little ARM machine is a beast in the size of a cigarette pack, featuring a total of eight CPU cores, an ethernet port and most importantly an USB 3.0 port to connect an external hard drive. It also comes with a plastic case, with a small fan inside and a PSU that is strong enough to power external hard drives connected to the USB ports. I ordered the smaller “Lite” version, which has a slightly lower CPU clock rate, but costs a lot less than its bigger brother.
In this post I’ll guide you quickly through the installation process of the ubuntu image on a micro SD-Card, how to make use of all the space on the microSD card and how to secure this little fellow a little after the installation of the image.
QCAD is a great free and open source CAD software. Although limited to 2D design, it is my favorite tool for drafting, construction and simple sketches. It is well documented overall, but one issue I could not find a solution for, was how to label dimensions with symbols, special characters or certain font styles (bold, italic, super-/subscript).
This blog post provides a simple trick to get it done.
I am recently working on some scientific papers for which I have to visualize a lot of mathematical functions. In a good scientific paper the graphs (and visualizations in general) should be colorless and utilize dotted/dashed lines or lines with symbols on it instead of colors. This has several advantages: A colorless plot is more neutral to the reader, he/she does not get distracted by the different colors. A reader may also have a (subliminal) preference in color, so he/she pays more attention to e.g. the red curve than the yellow one, that is hardly readable on the white background anyway. This also helps to distinguish functions, if they are plotted in one diagram and printed in gray scale mode or read by color blind people. Also, if two identical functions are plotted in one diagram, using just colors will probably only show one of the functions and hide the other.
I am using the CAS software Maxima to do the calculations, which in turn uses gnuplot to plot the functions. Gnuplot alone does the job perfectly. However, when plotting functions (and not discrete data points) using lines with symbols on it from within Maxima (which also uses gnuplot to plot the graphs), the results are quite ugly. There seems to be no proper solution to this problem.
This blog post suggests a workaround that is rather ugly, but which produces very nice graphics, that meet the above-mentioned requirements.
I recently bought a Samsung SSD to replace my HDD in my Arch Linux notebook. It is a “Samsung SSD 840 EVO 2.5 Zoll SATA”. One of the first things I do when I get new hardware is to make sure the latest firmware is installed. Mine did not have the latest firmware update and – as it was to expect – Samsung SSD firmware updates under GNU/Linux are not (officially) supported. Samsung ships only Microsoft Windows software, called “Magician”, which can directly update the firmware or create a live USB-Stick to do the update. Additionally, they provide *.iso image files (one for Microsoft Windows systems and one for Apple computer, respectively) to update the firmware from a live CD. The *.iso image file intended for Microsoft Windows would also work under GNU/Linux, only that my notebook does not have a CD Drive anymore. Obvioulsy, the only option left was to create my own live USB-Stick under GNU/Linux – without using Microsoft Windows and that crappy Samsung “Magician” software. A simple “dd” comand to “burn” the *.iso file on an USB-Stick did not do the trick, as the Isolinux version Samsung uses is over 10 years (!) old.
This article shows how to update the firmware of a “Samsung SSD 840 EVO 2.5 Zoll SATA” under GNU/Linux using a bootable live USB-Stick.
There is a lot of confusion and wrong information in the internet about the Unified Extensible Firmware Interface (UEFI) and how to set it up correctly – especially under GNU/Linux. What makes things worse and also confused me a lot is that all vendors tend to implement this “standard” differently. So although UEFI is defined as a new industry standard replacing the BIOS, it can hardly be called “standard” at this time. Yet another problem of understanding UEFI is, that people seem to mix up words that have a special meaning.
My old notebook still uses the old BIOS-MBR setup, not capable of any UEFI fancy-ness. But it is dying, so I recently bought a new one. It is an “HP EliteBook 840 G1”. I used that opportunity to familiarize myself with UEFI and GNU/Linux.
This article explains two things (only taking GPT setups into account):
How is UEFI implemented in practice and set up with GNU/Linux?
Since USB-Sticks, that are fast and have a high capacity, are finally affordable, I decided to buy a new one. I usually install a GNU/Linux live CD (more precisely live USB) distribution on my USB-Sticks: either SystemRescueCd or Kali Linux (former Backtrack). The left over space is used for the classical purpose of an USB-Stick – data exchange. Todays USB-Sticks have enough capacity to easily fit several GNU/Linux live distributions on them, while still leaving enough space for other data. So my plan was to create a multiboot USB-Stick, that would boot my favourite GNU/Linux live distributions mentioned above. Unfortunately, searching the internet for implementing this did not give me any satisfactory results. There are a ton of guides that explain how to create an USB-Stick that boots GNU/Linux, but there are almost no multiboot solutions. The few howto’s about multiboot USB-Sticks are either about booting *.iso files (which only works with some GNU/Linux distributions) with GRUB 2 (which is designed for static boot setups anyway) or require further customized modifications of the GNU/Linux live distributions. I wanted a simpler solution that – once created – allows for easy updating of the installed GNU/Linux live distributions.
This guide will explain how to create a multiboot USB-Stick that can boot several GNU/Linux live dirstibutions via Syslinux chainloading. It will have several partitions (one for each OS and one for the main Syslinux bootloader) and a separate data partition, that can be formated independently in any way you like, so that your data is seperated from the operation system data. This guide installs SystemRescueCD and Kali Linux on your multiboot USB-Stick, but any other GNU/Linux live distribution should work as well. Adding more than two OS should also be no problem.
Everybody knows the code on the screens in the movie the matrix. You can see it for example when the character “cypher” talks to “neo” somewhen in the night, and the green letters fall down on those second-hand dell screens behind them. Funky. I want that too.
I’ve written a python program that uses curses to create a similar looking animation and just now cleaned up the code a bit and made sure it runs in python 2 and 3. You can get the source code on github and there’s a screenshot and a short explaination after the break…